Provide customized design one-stop service
Introduction
High-performance 200 Nm³/h industrial PEM electrolyzer stack designed for large-scale green hydrogen production. Featuring pure titanium bipolar plates and advanced proton exchange membrane technology, this system delivers stable, high-purity hydrogen output for renewable energy storage, chemical synthesis and industrial gas applications.
Share:
Product Description
1.Hydrogen production capacity: 200Nm3/h
2.Pressure: 0-1.6MPa
3.Electrolyzer: 1 unit of 200Nm3/h electrolyzer
4.Purity: ≥99.999%
5.Dew point: ≤-65℃
2.Basic Parameters of Hydrogen Production System
| Number | Item | Parameter | Remarks |
| 1 | Rated hydrogen production | 200 Nm³/h | 1 atm, 0°C |
| 2 | Working pressure | 0–1.6 MPa | 1 atm, 0°C |
| 3 | DC power consumption | ≤ 4.8 kWh/Nm³ | |
| 4 | Working temperature | 50–60°C | |
| 5 | Current density | 1.5 A/cm² | |
| 6 | Start-up time | Cold start ≥ 10 min, hot start ≤ 5 min | |
| 7 | Load range | 20–100% | |
| 8 | Design life | 80000 h |
3.Utility Engineering
| No. | Utility Type | Technical Requirements |
| 1 | Pure Water | Conductivity: < 0.1 μS/cm |
| 2 | Cooling Water | Conductivity: ≤ 20 μS/cm |
| 3 | Instrument Air | Oil content: < 5 mg/m³ |
| 4 | Nitrogen | Consumption for start-up: 5 m³ |
4. Pure Water Unit
| Item | Requirement |
| Deionized water production capacity | ≥ 2 t/h |
| Electrolysis water pressure | 0.3–0.4 MPa |
| Electrolysis water quality | Deionized water (< 0.1 μS/cm, > 10 MΩ·cm) |
| Electrolysis water interface | DN 1”, SS316 |
| Control system | Supports Modbus TCP/IP communication protocol |
5.Supply Scope
| Serial No. | Name | Unit | Quantity |
| 1 | Hydrogen production system | Set | 1 |
| 1.1 | Electrolyzer | Unit | 1 |
| 1.2 | Hydrogen production frame | Unit | 1 |
| 1.3 | Circulating water pump | Unit | 1 |
| 1.4 | Hydrogen separator | Unit | 1 |
| 1.5 | Oxygen-water separator | Unit | 1 |
| 1.6 | Pressure transmitter | Piece | 6 |
| 1.7 | Temperature transmitter | Piece | 6 |
| 1.8 | Magnetic flap level gauge | Piece | 2 |
| 1.9 | Differential pressure transmitter | Piece | 1 |
| 1.10 | Heating cylinder | Piece | 3 |
| 1.11 | Deoxygenation tower | Piece | 1 |
| 1.12 | Solenoid valve | Piece | 2 |
| 1.13 | Molecular sieve | Set | 1 |
| 1.14 | Heat exchanger | Piece | 1 |
| 1.15 | Pneumatic ball valve | Piece | 13 |
| 1.16 | Pneumatic ball valve | Piece | 6 |
| 1.17 | Positioner | Piece | 19 |
| 1.18 | Water quality probe | Piece | 2 |
| 1.19 | Flammable gas alarm | Piece | 2 |
| 1.20 | Gas path pipe fittings | Set | 1 |
| 1.21 | Water path pipe fittings | Set | 1 |
| 1.22 | Hydrogen in oxygen detector | Piece | 1 |
| 1.23 | Dew point meter | Piece | 1 |
| 2 | Electrical system | Set | 1 |
| 2.1 | Power switch | Unit | 1 |
| 2.2 | Electrical distribution panel | Unit | 1 |
| 2.3 | Electrolysis power supply | Unit | 1 |
| 2.4 | Control program | Set | 1 |
| 2.5 | PLC control system | Set | 1 |
| 2.6 | Control cabinet and supporting accessories | Set | 1 |
| 2.7 | Power distribution cabinet | Unit | 1 |
| 3 | Installation auxiliary materials (copper busbar, cable, pipeline, etc.) | Set | 1 |
| 4 | Installation and commissioning fee | Set | 1 |
| 5 | Container | Set | 1 |
Need Custom Design and Development for CCM And PEM Electrolyzers?
We strongly support customer personalisation and customisation, providing the most suitable solutions based on different customer needs. If you have any customisation requirements, please contact us and we will provide you with the most professional advice and products.
View MoreRelated Products
We R&D, design, manufacturing and sales of PEM membrane electrodes, hydrogen and oxygen electrolytic cells and other ancillary products.
Advanced PEM Fuel Cell-Based Hydrogen Generator for Home Use
The 800ml 200ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of four layers of 200ml PEM proton exchange membranes stacked together.
The 800ml 200ml/layer series Dual-Output Hydrogen-Oxygen Electrolyzer is composed of four layers of 200ml PEM proton exchange membranes stacked together.
1500ml/min PEM Electrolyzers for Hydrogen Production - Fuel Cell for Low-Carbon Mobility A1500D-6250
The 1500ml 250ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of six layers of 250ml PEM proton exchange membranes stacked together.
Compact Electrolyzed Alkaline Water Module with Pure Titanium Electrodes – Three-Button Design
The Three-Button Electrolyzed Alkaline Water Module is designed for producing purified alkaline water with PH levels of 8.5 and 9.5. Using a flow sensor and TDS monitoring system, this module adjusts the electrolyzer’s power to produce alkaline water at the cathode and acidic water at the anode.
The 1000ml 500ml/layer series Electrolyzer is designed for high-output hydrogen and oxygen generation with a compact and reliable design. It efficiently produces hydrogen and oxygen while maintaining a consistent and stable performance. Ideal for industrial applications that require a high volume of hydrogen.
11-Plate Alkaline Water Ionizer Module J002-11P for Smart Water Dispenser Projects
The J002-11P Electrolyzer is designed for high-efficiency hydrogen production with an 11-layer microfiltration membrane, platinum coating for extended lifespan, and dual-sided coating for superior scale removal. Its compact structure ensures stable and reliable performance, making it ideal for sustainable energy applications.
The 225ml 75ml/layer series Three-Layer Hydrogen-Oxygen Electrolyzer consists of three layers of 75ml PEM (Proton Exchange Membrane) stacked together.
Pure Hydrogen Water PEM Generator for Residential Water Systems
The 600ml 150ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of four layers of 150ml PEM proton exchange membranes stacked together.
