Provide customized design one-stop service
Introduction
High-performance 200 Nm³/h industrial PEM electrolyzer stack designed for large-scale green hydrogen production. Featuring pure titanium bipolar plates and advanced proton exchange membrane technology, this system delivers stable, high-purity hydrogen output for renewable energy storage, chemical synthesis and industrial gas applications.
Share:
Product Description
1.Hydrogen production capacity: 200Nm3/h
2.Pressure: 0-1.6MPa
3.Electrolyzer: 1 unit of 200Nm3/h electrolyzer
4.Purity: ≥99.999%
5.Dew point: ≤-65℃
2.Basic Parameters of Hydrogen Production System
| Number | Item | Parameter | Remarks |
| 1 | Rated hydrogen production | 200 Nm³/h | 1 atm, 0°C |
| 2 | Working pressure | 0–1.6 MPa | 1 atm, 0°C |
| 3 | DC power consumption | ≤ 4.8 kWh/Nm³ | |
| 4 | Working temperature | 50–60°C | |
| 5 | Current density | 1.5 A/cm² | |
| 6 | Start-up time | Cold start ≥ 10 min, hot start ≤ 5 min | |
| 7 | Load range | 20–100% | |
| 8 | Design life | 80000 h |
3.Utility Engineering
| No. | Utility Type | Technical Requirements |
| 1 | Pure Water | Conductivity: < 0.1 μS/cm |
| 2 | Cooling Water | Conductivity: ≤ 20 μS/cm |
| 3 | Instrument Air | Oil content: < 5 mg/m³ |
| 4 | Nitrogen | Consumption for start-up: 5 m³ |
4. Pure Water Unit
| Item | Requirement |
| Deionized water production capacity | ≥ 2 t/h |
| Electrolysis water pressure | 0.3–0.4 MPa |
| Electrolysis water quality | Deionized water (< 0.1 μS/cm, > 10 MΩ·cm) |
| Electrolysis water interface | DN 1”, SS316 |
| Control system | Supports Modbus TCP/IP communication protocol |
5.Supply Scope
| Serial No. | Name | Unit | Quantity |
| 1 | Hydrogen production system | Set | 1 |
| 1.1 | Electrolyzer | Unit | 1 |
| 1.2 | Hydrogen production frame | Unit | 1 |
| 1.3 | Circulating water pump | Unit | 1 |
| 1.4 | Hydrogen separator | Unit | 1 |
| 1.5 | Oxygen-water separator | Unit | 1 |
| 1.6 | Pressure transmitter | Piece | 6 |
| 1.7 | Temperature transmitter | Piece | 6 |
| 1.8 | Magnetic flap level gauge | Piece | 2 |
| 1.9 | Differential pressure transmitter | Piece | 1 |
| 1.10 | Heating cylinder | Piece | 3 |
| 1.11 | Deoxygenation tower | Piece | 1 |
| 1.12 | Solenoid valve | Piece | 2 |
| 1.13 | Molecular sieve | Set | 1 |
| 1.14 | Heat exchanger | Piece | 1 |
| 1.15 | Pneumatic ball valve | Piece | 13 |
| 1.16 | Pneumatic ball valve | Piece | 6 |
| 1.17 | Positioner | Piece | 19 |
| 1.18 | Water quality probe | Piece | 2 |
| 1.19 | Flammable gas alarm | Piece | 2 |
| 1.20 | Gas path pipe fittings | Set | 1 |
| 1.21 | Water path pipe fittings | Set | 1 |
| 1.22 | Hydrogen in oxygen detector | Piece | 1 |
| 1.23 | Dew point meter | Piece | 1 |
| 2 | Electrical system | Set | 1 |
| 2.1 | Power switch | Unit | 1 |
| 2.2 | Electrical distribution panel | Unit | 1 |
| 2.3 | Electrolysis power supply | Unit | 1 |
| 2.4 | Control program | Set | 1 |
| 2.5 | PLC control system | Set | 1 |
| 2.6 | Control cabinet and supporting accessories | Set | 1 |
| 2.7 | Power distribution cabinet | Unit | 1 |
| 3 | Installation auxiliary materials (copper busbar, cable, pipeline, etc.) | Set | 1 |
| 4 | Installation and commissioning fee | Set | 1 |
| 5 | Container | Set | 1 |
Need Custom Design and Development for CCM And PEM Electrolyzers?
We strongly support customer personalisation and customisation, providing the most suitable solutions based on different customer needs. If you have any customisation requirements, please contact us and we will provide you with the most professional advice and products.
View MoreRelated Products
We R&D, design, manufacturing and sales of PEM membrane electrodes, hydrogen and oxygen electrolytic cells and other ancillary products.
A stable pure water circulation system is essential for the performance and durability of PEM electrolyzers. This brushless DC pump is specifically designed to work with PEM cell water tanks, providing continuous and reliable water circulation. With DC12V and DC24V power options, it is an ideal accessory for small hydrogen generators, laboratory PE
PEM Hydrogen-Rich Water Dispenser with 1000ppb+ Hydrogen Concentration
Gitan's PEM Hydrogen-Rich Water Dispenser is designed to produce hydrogen-rich water using PEM electrolysis technology. With a hydrogen concentration above 1000ppb, a water flow rate of 1.0–1.3L/min, and a 1.5L purified water capacity, it offers a practical solution for users seeking a hydrogen-rich water dispensing system.
Alkaline Water Ionizer J002-7P 7plate
7-layer microfiltration membrane, offering a wide range of flow and pH adjustment. Platinum coating, ensuring reliable craftsmanship, strong adhesion, and long lifespan. Dual-sided coating, reversible for better scale removal and more stable output. Compact structure, providing reliable performance.
Efficient PEM Electrolyzer for Household Hydrogen-Rich Water Production
The 3000ml 250ml/layer series Dual-Output Hydrogen-Oxygen Electrolyzer is composed of 12 layers of 250ml PEM proton exchange membranes stacked together.
The 150ml 150ml/layer series Hydrogen and Oxygen Electrolyzer adopts the self-developed hot pressing PEM proton exchange membrane, which has controllable quality
1LPM Pump-Driven Dissolved Hydrogen Water Module for RO Systems
This Hydrogen-rich Water Module integrates a PEM electrolyzer, hydrogen dissolution pump, and resin filters to produce high-quality hydrogen-rich water with a 1LPM flow rate. It works seamlessly with RO water systems, ensuring efficient hydrogen infusion for drinking water.
Commercial-Grade PEM Electrolyzer for Long-Runtime HHO and Hydrogen Therapy Machines
The 300ml 300ml/layer series Electrolyzer is designed for efficient hydrogen and oxygen production through the electrolysis of pure water. It has a hydrogen output of 300±30ml/min and an oxygen output of 150±15ml/min, operating with a constant current power supply.
Integrated PEM Electrolysis Module for Smart Water Systems
The 1000ml 250ml/layer series Dual-Output Hydrogen-Oxygen Electrolyzer is composed of four layers of 250ml PEM proton exchange membranes stacked together.
