Provide customized design one-stop service
Introduction
High-performance 200 Nm³/h industrial PEM electrolyzer stack designed for large-scale green hydrogen production. Featuring pure titanium bipolar plates and advanced proton exchange membrane technology, this system delivers stable, high-purity hydrogen output for renewable energy storage, chemical synthesis and industrial gas applications.
Share:
Product Description
1.Hydrogen production capacity: 200Nm3/h
2.Pressure: 0-1.6MPa
3.Electrolyzer: 1 unit of 200Nm3/h electrolyzer
4.Purity: ≥99.999%
5.Dew point: ≤-65℃
2.Basic Parameters of Hydrogen Production System
| Number | Item | Parameter | Remarks |
| 1 | Rated hydrogen production | 200 Nm³/h | 1 atm, 0°C |
| 2 | Working pressure | 0–1.6 MPa | 1 atm, 0°C |
| 3 | DC power consumption | ≤ 4.8 kWh/Nm³ | |
| 4 | Working temperature | 50–60°C | |
| 5 | Current density | 1.5 A/cm² | |
| 6 | Start-up time | Cold start ≥ 10 min, hot start ≤ 5 min | |
| 7 | Load range | 20–100% | |
| 8 | Design life | 80000 h |
3.Utility Engineering
| No. | Utility Type | Technical Requirements |
| 1 | Pure Water | Conductivity: < 0.1 μS/cm |
| 2 | Cooling Water | Conductivity: ≤ 20 μS/cm |
| 3 | Instrument Air | Oil content: < 5 mg/m³ |
| 4 | Nitrogen | Consumption for start-up: 5 m³ |
4. Pure Water Unit
| Item | Requirement |
| Deionized water production capacity | ≥ 2 t/h |
| Electrolysis water pressure | 0.3–0.4 MPa |
| Electrolysis water quality | Deionized water (< 0.1 μS/cm, > 10 MΩ·cm) |
| Electrolysis water interface | DN 1”, SS316 |
| Control system | Supports Modbus TCP/IP communication protocol |
5.Supply Scope
| Serial No. | Name | Unit | Quantity |
| 1 | Hydrogen production system | Set | 1 |
| 1.1 | Electrolyzer | Unit | 1 |
| 1.2 | Hydrogen production frame | Unit | 1 |
| 1.3 | Circulating water pump | Unit | 1 |
| 1.4 | Hydrogen separator | Unit | 1 |
| 1.5 | Oxygen-water separator | Unit | 1 |
| 1.6 | Pressure transmitter | Piece | 6 |
| 1.7 | Temperature transmitter | Piece | 6 |
| 1.8 | Magnetic flap level gauge | Piece | 2 |
| 1.9 | Differential pressure transmitter | Piece | 1 |
| 1.10 | Heating cylinder | Piece | 3 |
| 1.11 | Deoxygenation tower | Piece | 1 |
| 1.12 | Solenoid valve | Piece | 2 |
| 1.13 | Molecular sieve | Set | 1 |
| 1.14 | Heat exchanger | Piece | 1 |
| 1.15 | Pneumatic ball valve | Piece | 13 |
| 1.16 | Pneumatic ball valve | Piece | 6 |
| 1.17 | Positioner | Piece | 19 |
| 1.18 | Water quality probe | Piece | 2 |
| 1.19 | Flammable gas alarm | Piece | 2 |
| 1.20 | Gas path pipe fittings | Set | 1 |
| 1.21 | Water path pipe fittings | Set | 1 |
| 1.22 | Hydrogen in oxygen detector | Piece | 1 |
| 1.23 | Dew point meter | Piece | 1 |
| 2 | Electrical system | Set | 1 |
| 2.1 | Power switch | Unit | 1 |
| 2.2 | Electrical distribution panel | Unit | 1 |
| 2.3 | Electrolysis power supply | Unit | 1 |
| 2.4 | Control program | Set | 1 |
| 2.5 | PLC control system | Set | 1 |
| 2.6 | Control cabinet and supporting accessories | Set | 1 |
| 2.7 | Power distribution cabinet | Unit | 1 |
| 3 | Installation auxiliary materials (copper busbar, cable, pipeline, etc.) | Set | 1 |
| 4 | Installation and commissioning fee | Set | 1 |
| 5 | Container | Set | 1 |
Need Custom Design and Development for CCM And PEM Electrolyzers?
We strongly support customer personalisation and customisation, providing the most suitable solutions based on different customer needs. If you have any customisation requirements, please contact us and we will provide you with the most professional advice and products.
View MoreRelated Products
We R&D, design, manufacturing and sales of PEM membrane electrodes, hydrogen and oxygen electrolytic cells and other ancillary products.
The 300ml 300ml/layer series Electrolyzer is designed for efficient hydrogen and oxygen production through the electrolysis of pure water. It has a hydrogen output of 300±30ml/min and an oxygen output of 150±15ml/min, operating with a constant current power supply.
The 2500ml 500ml/layer series is an efficient and reliable system for producing hydrogen and oxygen through electrolysis of pure water. With a proton exchange membrane (PEM), it ensures high-purity hydrogen production at a rate of 2500ml/min and oxygen at 1250ml/min. The electrolyzer operates within a wide range of voltage and current, offering sta
Laboratory PEM Electrolyzer A400D‑2200 400 mL/min Hydrogen Production
The 400ml 200ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of a stacked combination of dual-layer 200ml PEM proton exchange membrane.
J002-11P 11-Plate Electrolysis Ionizer for Dispensers – OEM/ODM Integration Support
The J002-11P Electrolyzer is designed for high-efficiency hydrogen production with an 11-layer microfiltration membrane, platinum coating for extended lifespan, and dual-sided coating for superior scale removal. Its compact structure ensures stable and reliable performance, making it ideal for sustainable energy applications.
RO Water Dispenser with Alkaline Electrolyzer | Best for Healthy Alkaline Water Generation
7-layer microfiltration membrane, offering a wide range of flow and pH adjustment. Platinum coating, ensuring reliable craftsmanship, strong adhesion, and long lifespan. Dual-sided coating, reversible for better scale removal and more stable output. Compact structure, providing reliable performance.
200 Nm³/h Industrial PEM Electrolyzer Stack with pure titanium plates for green hydrogen production. High efficiency, long lifespan and stable output for large-scale hydrogen plants.
PEM Electrolyzer for Hydrogen Production in Fuel Cells
The 5000ml 500ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of ten layers of 500ml PEM proton exchange membranes stacked together.
High-Efficiency Flow-Type Hydrogen Water Module for Strong H₂ Output
Introducing our Flow-Type Hydrogen Water Module, designed for integration with Reverse Osmosis (RO) systems and water dispensers. This compact module is perfect for spaces with limited room, offering easy installation without the need for excessive additional accessories.
