Provide customized design one-stop service
Introduction
High-performance 200 Nm³/h industrial PEM electrolyzer stack designed for large-scale green hydrogen production. Featuring pure titanium bipolar plates and advanced proton exchange membrane technology, this system delivers stable, high-purity hydrogen output for renewable energy storage, chemical synthesis and industrial gas applications.
Share:
Product Description
1.Hydrogen production capacity: 200Nm3/h
2.Pressure: 0-1.6MPa
3.Electrolyzer: 1 unit of 200Nm3/h electrolyzer
4.Purity: ≥99.999%
5.Dew point: ≤-65℃
2.Basic Parameters of Hydrogen Production System
| Number | Item | Parameter | Remarks |
| 1 | Rated hydrogen production | 200 Nm³/h | 1 atm, 0°C |
| 2 | Working pressure | 0–1.6 MPa | 1 atm, 0°C |
| 3 | DC power consumption | ≤ 4.8 kWh/Nm³ | |
| 4 | Working temperature | 50–60°C | |
| 5 | Current density | 1.5 A/cm² | |
| 6 | Start-up time | Cold start ≥ 10 min, hot start ≤ 5 min | |
| 7 | Load range | 20–100% | |
| 8 | Design life | 80000 h |
3.Utility Engineering
| No. | Utility Type | Technical Requirements |
| 1 | Pure Water | Conductivity: < 0.1 μS/cm |
| 2 | Cooling Water | Conductivity: ≤ 20 μS/cm |
| 3 | Instrument Air | Oil content: < 5 mg/m³ |
| 4 | Nitrogen | Consumption for start-up: 5 m³ |
4. Pure Water Unit
| Item | Requirement |
| Deionized water production capacity | ≥ 2 t/h |
| Electrolysis water pressure | 0.3–0.4 MPa |
| Electrolysis water quality | Deionized water (< 0.1 μS/cm, > 10 MΩ·cm) |
| Electrolysis water interface | DN 1”, SS316 |
| Control system | Supports Modbus TCP/IP communication protocol |
5.Supply Scope
| Serial No. | Name | Unit | Quantity |
| 1 | Hydrogen production system | Set | 1 |
| 1.1 | Electrolyzer | Unit | 1 |
| 1.2 | Hydrogen production frame | Unit | 1 |
| 1.3 | Circulating water pump | Unit | 1 |
| 1.4 | Hydrogen separator | Unit | 1 |
| 1.5 | Oxygen-water separator | Unit | 1 |
| 1.6 | Pressure transmitter | Piece | 6 |
| 1.7 | Temperature transmitter | Piece | 6 |
| 1.8 | Magnetic flap level gauge | Piece | 2 |
| 1.9 | Differential pressure transmitter | Piece | 1 |
| 1.10 | Heating cylinder | Piece | 3 |
| 1.11 | Deoxygenation tower | Piece | 1 |
| 1.12 | Solenoid valve | Piece | 2 |
| 1.13 | Molecular sieve | Set | 1 |
| 1.14 | Heat exchanger | Piece | 1 |
| 1.15 | Pneumatic ball valve | Piece | 13 |
| 1.16 | Pneumatic ball valve | Piece | 6 |
| 1.17 | Positioner | Piece | 19 |
| 1.18 | Water quality probe | Piece | 2 |
| 1.19 | Flammable gas alarm | Piece | 2 |
| 1.20 | Gas path pipe fittings | Set | 1 |
| 1.21 | Water path pipe fittings | Set | 1 |
| 1.22 | Hydrogen in oxygen detector | Piece | 1 |
| 1.23 | Dew point meter | Piece | 1 |
| 2 | Electrical system | Set | 1 |
| 2.1 | Power switch | Unit | 1 |
| 2.2 | Electrical distribution panel | Unit | 1 |
| 2.3 | Electrolysis power supply | Unit | 1 |
| 2.4 | Control program | Set | 1 |
| 2.5 | PLC control system | Set | 1 |
| 2.6 | Control cabinet and supporting accessories | Set | 1 |
| 2.7 | Power distribution cabinet | Unit | 1 |
| 3 | Installation auxiliary materials (copper busbar, cable, pipeline, etc.) | Set | 1 |
| 4 | Installation and commissioning fee | Set | 1 |
| 5 | Container | Set | 1 |
Need Custom Design and Development for CCM And PEM Electrolyzers?
We strongly support customer personalisation and customisation, providing the most suitable solutions based on different customer needs. If you have any customisation requirements, please contact us and we will provide you with the most professional advice and products.
View MoreRelated Products
We R&D, design, manufacturing and sales of PEM membrane electrodes, hydrogen and oxygen electrolytic cells and other ancillary products.
mix cationic&anionic polishing resin filter
The 10" Small T Polishing Resin Filter Cartridge is constructed using DuPont resin for superior filtration performance. It is designed to provide efficient water purification in a compact size, with a length of 276 mm and a diameter of 48.5 mm, making it ideal for a range of filtration systems.
600ml/min Hydrogen Generation via PEM Electrolyzers - Efficient Hydrogen Storage Systems A600A-4150
The 600ml 150ml/layer serie Electrolyzer. Dual-output hydrogen design.Hydrogen production is 600ml per minute.Adopting four-layer 150ml hot-pressed PEM proton exchange membrane.
The 600ml 150ml/layer series Hydrogen-Oxygen Electrolyzer Module, designed with a compact structure, is ideal for producing high-purity hydrogen and oxygen. The PEM electrode offers long-lasting performance, reaching up to 8,000 hours of stable operation. The module suitable for various industrial applications.
Alkaline Ionizer and Electrolysis Electrolyzer for Efficient Alkaline Water Generation
The J002-5P electrolytic water electrolyzer features a multi-layer double-sided platinum-coated micro filtration membrane.
The 150ml 75ml/layer series Dual-Layer Hydrogen-Oxygen Electrolyzer is composed of two layers of 75ml PEM (Proton Exchange Membrane) stacked together.
The 100ml single layer series Electrolyzer, using hot-pressed PEM proton exchange film, low working voltage, PEM proton exchange film surface coated with catalytic layer, good adhesion, long life
The 60ml single layer series, using hot-pressed PEM proton exchange film, low working voltage, PEM proton exchange film surface coated with catalytic layer, good adhesion, long life, compact product structure, reliable performance, beautiful appearance.
Smart Electrolyzed Alkaline Water Module with Multi-Level Operation
Electrolyzed Alkaline Water Module is designed for producing purified alkaline water with PH levels of PH5.5;PH 8.5; PH9.5 and PH10.5. Using a flow sensor and TDS monitoring system, this module adjusts the electrolyzer’s power to produce alkaline water at the cathode and acidic water at the anode.
