Provide customized design one-stop service
Introduction
High-performance 200 Nm³/h industrial PEM electrolyzer stack designed for large-scale green hydrogen production. Featuring pure titanium bipolar plates and advanced proton exchange membrane technology, this system delivers stable, high-purity hydrogen output for renewable energy storage, chemical synthesis and industrial gas applications.
Share:
Product Description
1.Hydrogen production capacity: 200Nm3/h
2.Pressure: 0-1.6MPa
3.Electrolyzer: 1 unit of 200Nm3/h electrolyzer
4.Purity: ≥99.999%
5.Dew point: ≤-65℃
2.Basic Parameters of Hydrogen Production System
| Number | Item | Parameter | Remarks |
| 1 | Rated hydrogen production | 200 Nm³/h | 1 atm, 0°C |
| 2 | Working pressure | 0–1.6 MPa | 1 atm, 0°C |
| 3 | DC power consumption | ≤ 4.8 kWh/Nm³ | |
| 4 | Working temperature | 50–60°C | |
| 5 | Current density | 1.5 A/cm² | |
| 6 | Start-up time | Cold start ≥ 10 min, hot start ≤ 5 min | |
| 7 | Load range | 20–100% | |
| 8 | Design life | 80000 h |
3.Utility Engineering
| No. | Utility Type | Technical Requirements |
| 1 | Pure Water | Conductivity: < 0.1 μS/cm |
| 2 | Cooling Water | Conductivity: ≤ 20 μS/cm |
| 3 | Instrument Air | Oil content: < 5 mg/m³ |
| 4 | Nitrogen | Consumption for start-up: 5 m³ |
4. Pure Water Unit
| Item | Requirement |
| Deionized water production capacity | ≥ 2 t/h |
| Electrolysis water pressure | 0.3–0.4 MPa |
| Electrolysis water quality | Deionized water (< 0.1 μS/cm, > 10 MΩ·cm) |
| Electrolysis water interface | DN 1”, SS316 |
| Control system | Supports Modbus TCP/IP communication protocol |
5.Supply Scope
| Serial No. | Name | Unit | Quantity |
| 1 | Hydrogen production system | Set | 1 |
| 1.1 | Electrolyzer | Unit | 1 |
| 1.2 | Hydrogen production frame | Unit | 1 |
| 1.3 | Circulating water pump | Unit | 1 |
| 1.4 | Hydrogen separator | Unit | 1 |
| 1.5 | Oxygen-water separator | Unit | 1 |
| 1.6 | Pressure transmitter | Piece | 6 |
| 1.7 | Temperature transmitter | Piece | 6 |
| 1.8 | Magnetic flap level gauge | Piece | 2 |
| 1.9 | Differential pressure transmitter | Piece | 1 |
| 1.10 | Heating cylinder | Piece | 3 |
| 1.11 | Deoxygenation tower | Piece | 1 |
| 1.12 | Solenoid valve | Piece | 2 |
| 1.13 | Molecular sieve | Set | 1 |
| 1.14 | Heat exchanger | Piece | 1 |
| 1.15 | Pneumatic ball valve | Piece | 13 |
| 1.16 | Pneumatic ball valve | Piece | 6 |
| 1.17 | Positioner | Piece | 19 |
| 1.18 | Water quality probe | Piece | 2 |
| 1.19 | Flammable gas alarm | Piece | 2 |
| 1.20 | Gas path pipe fittings | Set | 1 |
| 1.21 | Water path pipe fittings | Set | 1 |
| 1.22 | Hydrogen in oxygen detector | Piece | 1 |
| 1.23 | Dew point meter | Piece | 1 |
| 2 | Electrical system | Set | 1 |
| 2.1 | Power switch | Unit | 1 |
| 2.2 | Electrical distribution panel | Unit | 1 |
| 2.3 | Electrolysis power supply | Unit | 1 |
| 2.4 | Control program | Set | 1 |
| 2.5 | PLC control system | Set | 1 |
| 2.6 | Control cabinet and supporting accessories | Set | 1 |
| 2.7 | Power distribution cabinet | Unit | 1 |
| 3 | Installation auxiliary materials (copper busbar, cable, pipeline, etc.) | Set | 1 |
| 4 | Installation and commissioning fee | Set | 1 |
| 5 | Container | Set | 1 |
Need Custom Design and Development for CCM And PEM Electrolyzers?
We strongly support customer personalisation and customisation, providing the most suitable solutions based on different customer needs. If you have any customisation requirements, please contact us and we will provide you with the most professional advice and products.
View MoreRelated Products
We R&D, design, manufacturing and sales of PEM membrane electrodes, hydrogen and oxygen electrolytic cells and other ancillary products.
Advanced Alkaline Water Ionizer with Durable Pure Titanium Electrodes
The J002-3P Electrolyzer provides high-efficiency hydrogen production with a 3-layer microfiltration membrane and platinum coating. Designed for water with specific TDS requirements, it offers adjustable pH for control, dual-sided coating for scale removal, and stable output. This electrolyzer is compact, durable, and ideal for clean energy applica
200ml/min Hydrogen Electrolyzers for Water Purification - Hydrogen Rich Water Solutions A200-4050
The 200ml 50ml/layer series Four-Layer Hydrogen-Oxygen Electrolyzer consists of four layers of 50ml PEM (Proton Exchange Membrane) stacked together.
The 600ml 150ml/layer series Hydrogen-Oxygen Electrolyzer Module is equipped with dual hydrogen outputs and single oxygen output for efficient hydrogen-oxygen separation. Featuring catalyst-coated PEM, low working voltage, and a long operational lifespan of 8000 hours, this module provides stable and reliable performance
Compact Alkaline Water Electrolyzer for RO & Water Dispenser Integration
The J002-11P Electrolyzer is designed for high-efficiency hydrogen production with an 11-layer microfiltration membrane, platinum coating for extended lifespan, and dual-sided coating for superior scale removal. Its compact structure ensures stable and reliable performance, making it ideal for sustainable energy applications.
The 2400ml 300ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of 8 layers of 300ml PEM proton exchange membranes stacked together.
The 200ml 100ml/layer series Two-Layer Hydrogen-Oxygen Electrolyzer consists of two layers of 100ml PEM (Proton Exchange Membrane) stacked together.
Industrial PEM Electrolyzer Stack with pure titanium plates for green hydrogen production. High efficiency, long lifespan and stable output for large-scale hydrogen plants.
Ion Exchange Membrane Alkaline Water Ionizer J002-5P – 5-Plate Module for Alkaline Water Dispensers
The J002-5P electrolytic water electrolyzer features a multi-layer double-sided platinum-coated micro filtration membrane.
