Provide customized design one-stop service
Introduction
High-performance 200 Nm³/h industrial PEM electrolyzer stack designed for large-scale green hydrogen production. Featuring pure titanium bipolar plates and advanced proton exchange membrane technology, this system delivers stable, high-purity hydrogen output for renewable energy storage, chemical synthesis and industrial gas applications.
Share:
Product Description
1.Hydrogen production capacity: 200Nm3/h
2.Pressure: 0-1.6MPa
3.Electrolyzer: 1 unit of 200Nm3/h electrolyzer
4.Purity: ≥99.999%
5.Dew point: ≤-65℃
2.Basic Parameters of Hydrogen Production System
| Number | Item | Parameter | Remarks |
| 1 | Rated hydrogen production | 200 Nm³/h | 1 atm, 0°C |
| 2 | Working pressure | 0–1.6 MPa | 1 atm, 0°C |
| 3 | DC power consumption | ≤ 4.8 kWh/Nm³ | |
| 4 | Working temperature | 50–60°C | |
| 5 | Current density | 1.5 A/cm² | |
| 6 | Start-up time | Cold start ≥ 10 min, hot start ≤ 5 min | |
| 7 | Load range | 20–100% | |
| 8 | Design life | 80000 h |
3.Utility Engineering
| No. | Utility Type | Technical Requirements |
| 1 | Pure Water | Conductivity: < 0.1 μS/cm |
| 2 | Cooling Water | Conductivity: ≤ 20 μS/cm |
| 3 | Instrument Air | Oil content: < 5 mg/m³ |
| 4 | Nitrogen | Consumption for start-up: 5 m³ |
4. Pure Water Unit
| Item | Requirement |
| Deionized water production capacity | ≥ 2 t/h |
| Electrolysis water pressure | 0.3–0.4 MPa |
| Electrolysis water quality | Deionized water (< 0.1 μS/cm, > 10 MΩ·cm) |
| Electrolysis water interface | DN 1”, SS316 |
| Control system | Supports Modbus TCP/IP communication protocol |
5.Supply Scope
| Serial No. | Name | Unit | Quantity |
| 1 | Hydrogen production system | Set | 1 |
| 1.1 | Electrolyzer | Unit | 1 |
| 1.2 | Hydrogen production frame | Unit | 1 |
| 1.3 | Circulating water pump | Unit | 1 |
| 1.4 | Hydrogen separator | Unit | 1 |
| 1.5 | Oxygen-water separator | Unit | 1 |
| 1.6 | Pressure transmitter | Piece | 6 |
| 1.7 | Temperature transmitter | Piece | 6 |
| 1.8 | Magnetic flap level gauge | Piece | 2 |
| 1.9 | Differential pressure transmitter | Piece | 1 |
| 1.10 | Heating cylinder | Piece | 3 |
| 1.11 | Deoxygenation tower | Piece | 1 |
| 1.12 | Solenoid valve | Piece | 2 |
| 1.13 | Molecular sieve | Set | 1 |
| 1.14 | Heat exchanger | Piece | 1 |
| 1.15 | Pneumatic ball valve | Piece | 13 |
| 1.16 | Pneumatic ball valve | Piece | 6 |
| 1.17 | Positioner | Piece | 19 |
| 1.18 | Water quality probe | Piece | 2 |
| 1.19 | Flammable gas alarm | Piece | 2 |
| 1.20 | Gas path pipe fittings | Set | 1 |
| 1.21 | Water path pipe fittings | Set | 1 |
| 1.22 | Hydrogen in oxygen detector | Piece | 1 |
| 1.23 | Dew point meter | Piece | 1 |
| 2 | Electrical system | Set | 1 |
| 2.1 | Power switch | Unit | 1 |
| 2.2 | Electrical distribution panel | Unit | 1 |
| 2.3 | Electrolysis power supply | Unit | 1 |
| 2.4 | Control program | Set | 1 |
| 2.5 | PLC control system | Set | 1 |
| 2.6 | Control cabinet and supporting accessories | Set | 1 |
| 2.7 | Power distribution cabinet | Unit | 1 |
| 3 | Installation auxiliary materials (copper busbar, cable, pipeline, etc.) | Set | 1 |
| 4 | Installation and commissioning fee | Set | 1 |
| 5 | Container | Set | 1 |
Need Custom Design and Development for CCM And PEM Electrolyzers?
We strongly support customer personalisation and customisation, providing the most suitable solutions based on different customer needs. If you have any customisation requirements, please contact us and we will provide you with the most professional advice and products.
View MoreRelated Products
We R&D, design, manufacturing and sales of PEM membrane electrodes, hydrogen and oxygen electrolytic cells and other ancillary products.
The 50ml 50ml/layer series Electrolyzer CCM Catalysts Coated Membrane MEA Membrane Electrode Assembly Water Generator Electrolytic Cell via Water Electrolysis for Hydrogen Functional Water Purifier and Dispenser
PEM Electrolyzers for Fuel Cells: Unlocking Clean Energy Solutions for the Future
The 400ml 200ml/layer series Dual-Output Hydrogen-Oxygen Electrolyzer is composed of a stacked combination of dual-layer 200ml PEM proton exchange membrane.
The 60ml single layer series, using hot-pressed PEM proton exchange film, low working voltage, PEM proton exchange film surface coated with catalytic layer, good adhesion, long life, compact product structure, reliable performance, beautiful appearance.
Optimized PEM Hydrogen Water Module for Brand Customization
The 500ml 250ml/layer series Hydrogen And Oxygen Electrolyzer,it adopts the self-developed hot pressing PEM proton exchange membrane
High-Efficiency Flow-Type Hydrogen Water Module for Strong H₂ Output
Introducing our Flow-Type Hydrogen Water Module, designed for integration with Reverse Osmosis (RO) systems and water dispensers. This compact module is perfect for spaces with limited room, offering easy installation without the need for excessive additional accessories.
The 2000ml 200ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of ten layers of 200ml PEM proton exchange membranes stacked together.
Alkaline Electrolyzer and Ionizer for Healthy Alkaline Water Machines
7-layer microfiltration membrane, offering a wide range of flow and pH adjustment. Platinum coating, ensuring reliable craftsmanship, strong adhesion, and long lifespan. Dual-sided coating, reversible for better scale removal and more stable output. Compact structure, providing reliable performance.
This Hydrogen-rich Water Module integrates a PEM electrolyzer, hydrogen dissolution pump, and resin filters to produce high-quality hydrogen-rich water with a 1LPM flow rate. It works seamlessly with RO water systems, ensuring efficient hydrogen infusion for drinking water.
