Provide customized design one-stop service
Introduction
High-performance 200 Nm³/h industrial PEM electrolyzer stack designed for large-scale green hydrogen production. Featuring pure titanium bipolar plates and advanced proton exchange membrane technology, this system delivers stable, high-purity hydrogen output for renewable energy storage, chemical synthesis and industrial gas applications.
Share:
Product Description
1.Hydrogen production capacity: 200Nm3/h
2.Pressure: 0-1.6MPa
3.Electrolyzer: 1 unit of 200Nm3/h electrolyzer
4.Purity: ≥99.999%
5.Dew point: ≤-65℃
2.Basic Parameters of Hydrogen Production System
| Number | Item | Parameter | Remarks |
| 1 | Rated hydrogen production | 200 Nm³/h | 1 atm, 0°C |
| 2 | Working pressure | 0–1.6 MPa | 1 atm, 0°C |
| 3 | DC power consumption | ≤ 4.8 kWh/Nm³ | |
| 4 | Working temperature | 50–60°C | |
| 5 | Current density | 1.5 A/cm² | |
| 6 | Start-up time | Cold start ≥ 10 min, hot start ≤ 5 min | |
| 7 | Load range | 20–100% | |
| 8 | Design life | 80000 h |
3.Utility Engineering
| No. | Utility Type | Technical Requirements |
| 1 | Pure Water | Conductivity: < 0.1 μS/cm |
| 2 | Cooling Water | Conductivity: ≤ 20 μS/cm |
| 3 | Instrument Air | Oil content: < 5 mg/m³ |
| 4 | Nitrogen | Consumption for start-up: 5 m³ |
4. Pure Water Unit
| Item | Requirement |
| Deionized water production capacity | ≥ 2 t/h |
| Electrolysis water pressure | 0.3–0.4 MPa |
| Electrolysis water quality | Deionized water (< 0.1 μS/cm, > 10 MΩ·cm) |
| Electrolysis water interface | DN 1”, SS316 |
| Control system | Supports Modbus TCP/IP communication protocol |
5.Supply Scope
| Serial No. | Name | Unit | Quantity |
| 1 | Hydrogen production system | Set | 1 |
| 1.1 | Electrolyzer | Unit | 1 |
| 1.2 | Hydrogen production frame | Unit | 1 |
| 1.3 | Circulating water pump | Unit | 1 |
| 1.4 | Hydrogen separator | Unit | 1 |
| 1.5 | Oxygen-water separator | Unit | 1 |
| 1.6 | Pressure transmitter | Piece | 6 |
| 1.7 | Temperature transmitter | Piece | 6 |
| 1.8 | Magnetic flap level gauge | Piece | 2 |
| 1.9 | Differential pressure transmitter | Piece | 1 |
| 1.10 | Heating cylinder | Piece | 3 |
| 1.11 | Deoxygenation tower | Piece | 1 |
| 1.12 | Solenoid valve | Piece | 2 |
| 1.13 | Molecular sieve | Set | 1 |
| 1.14 | Heat exchanger | Piece | 1 |
| 1.15 | Pneumatic ball valve | Piece | 13 |
| 1.16 | Pneumatic ball valve | Piece | 6 |
| 1.17 | Positioner | Piece | 19 |
| 1.18 | Water quality probe | Piece | 2 |
| 1.19 | Flammable gas alarm | Piece | 2 |
| 1.20 | Gas path pipe fittings | Set | 1 |
| 1.21 | Water path pipe fittings | Set | 1 |
| 1.22 | Hydrogen in oxygen detector | Piece | 1 |
| 1.23 | Dew point meter | Piece | 1 |
| 2 | Electrical system | Set | 1 |
| 2.1 | Power switch | Unit | 1 |
| 2.2 | Electrical distribution panel | Unit | 1 |
| 2.3 | Electrolysis power supply | Unit | 1 |
| 2.4 | Control program | Set | 1 |
| 2.5 | PLC control system | Set | 1 |
| 2.6 | Control cabinet and supporting accessories | Set | 1 |
| 2.7 | Power distribution cabinet | Unit | 1 |
| 3 | Installation auxiliary materials (copper busbar, cable, pipeline, etc.) | Set | 1 |
| 4 | Installation and commissioning fee | Set | 1 |
| 5 | Container | Set | 1 |
Need Custom Design and Development for CCM And PEM Electrolyzers?
We strongly support customer personalisation and customisation, providing the most suitable solutions based on different customer needs. If you have any customisation requirements, please contact us and we will provide you with the most professional advice and products.
View MoreRelated Products
We R&D, design, manufacturing and sales of PEM membrane electrodes, hydrogen and oxygen electrolytic cells and other ancillary products.
The 250ml 250ml/layer series Electrolyzer is a reliable and efficient device designed for hydrogen and oxygen production through the electrolysis of pure water. It delivers a hydrogen output of 250±13ml/min and oxygen output of 125±6ml/min, using a constant current power supply. The electrolyzer operates with pure water (TDS <5ppm)
Hydrogen Inhaler 1500ml/min~2500ml/min Machine Hydrogen Oxygen Generator with PEM Electrolyzer
Gitan's PEM Hydrogen Inhaler is a hydrogen-generation machine available in two output options: 1500ml/min and 2500ml/min. Featuring PEM electrolysis technology, it offers buyers a choice of hydrogen output to suit different equipment requirements and product configurations.
Hydrogen Generation from Water Electrolysis with PEM Electrolyzers
The 1000ml 500ml/layer series Electrolyzer is designed for high-output hydrogen and oxygen generation with a compact and reliable design. It efficiently produces hydrogen and oxygen while maintaining a consistent and stable performance. Ideal for industrial applications that require a high volume of hydrogen.
Industrial PEM Electrolyzer Stack with pure titanium plates for green hydrogen production. High efficiency, long lifespan and stable output for large-scale hydrogen plants.
600ml/min PEM Electrolyzers for Renewable Hydrogen Production - Clean Energy & Storage A600D-4150
The 600ml 150ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of four layers of 150ml PEM proton exchange membranes stacked together.
RO Water Dispenser with Hydrogen Water Module for Enhanced Antioxidant Benefits
The Dialysis Membrane Hydrogen-rich Water Module (3LPM flow rate) uses a PEM electrolyzer and dialysis membrane technology to generate hydrogen-rich water. Integrated with RO water systems, it ensures efficient hydrogen infusion for drinking water. Featuring a pressure switch and water level sensor, it is ideal for home and industrial applications.
100ml/min PEM Electrolyzers for RO Water Systems - Hydrogen Generation for Water Treatment A100-1100
The 100ml 100ml/layer series Series Hydrogen and Oxygen Electrolyzer, using self-developed and designed hot pressing PEM proton exchange membrane
The 150ml 50ml/layer series Three-Layer Hydrogen-Oxygen Electrolyzer consists of three layers of 50ml PEM (Proton Exchange Membrane) stacked together.
