Provide customized design one-stop service

PEM Hydrogen and Oxygen Generator – H2 1000mL/min, O2 500mL/min

Introduction

The Gitan PEM Hydrogen and Oxygen Generator uses proton exchange membrane water electrolysis technology to generate hydrogen and oxygen through separate gas outlets.

The specified gas outputs are 1000mL/min hydrogen and 500mL/min oxygen. Separate connections allow the two gas streams to be routed individually according to the equipment instructions and application requirements.

The unit features a 3L water tank. Use purified or distilled water with TDS ≤ 5 ppm; do not use tap water or mineral water.

The specified DC electrical rating is 15V, 26A. Contact Gitan to confirm the complete power supply configuration, gas pressure, purity specifications, operating conditions and connection requirements before ordering.


Description Specification Product Advantages
Gitan PEM hydrogen and oxygen generator with separate gas outlets and a 3L water tank

Product Description

The Gitan PEM hydrogen and oxygen generator is a water electrolysis system with separate hydrogen and oxygen outlets. Its rated outputs are 1000mL/min for hydrogen and 500mL/min for oxygen.

PEM Water Electrolysis

The system uses a proton exchange membrane and electrode assembly to split water into hydrogen and oxygen. Hydrogen is generated at the cathode, while oxygen is generated at the anode. The gases are collected through separate outlet paths.

Separate Hydrogen and Oxygen Outlets

The specified hydrogen output is 1000mL/min, and the specified oxygen output is 500mL/min. The supplied illustration identifies the left connection as the hydrogen outlet and the right connection as the oxygen outlet when viewed from the front.

Always follow the outlet labels on the supplied equipment. Confirm connection dimensions, permitted backpressure and gas-handling requirements before connecting downstream equipment.

3L Water Tank and Source-Water Requirements

The machine has a specified 3L water tank. Use purified or distilled water with TDS ≤ 5 ppm. Tap water and mineral water are not suitable for the stated configuration.

Follow the operating instructions for filling level, water replacement and maintenance. Tank capacity alone does not establish continuous operating time.

DC Electrical Rating

The supplied DC electrical rating is 15V, 26A. Confirm the approved power supply, complete machine input requirements and whether this rating applies to the electrolysis assembly or the complete unit.

Product Configuration

The illustrated enclosure includes a front control panel, side handles and caster wheels. Confirm the final supplied configuration, dimensions, weight, accessories and control functions before ordering.

For technical specifications, performance test conditions and purchasing details, contact Gitan.


Technical Specifications

ParameterSpecification
Product TypePEM Hydrogen and Oxygen Generator
TechnologyProton Exchange Membrane (PEM) Water Electrolysis
Rated Hydrogen Output1000mL/min
Rated Oxygen Output500mL/min
Gas Outlet ConfigurationSeparate Hydrogen and Oxygen Outlets
Outlet ArrangementLeft: Hydrogen; Right: Oxygen, as Illustrated from the Front. Follow Equipment Labels.
Specified DC Voltage15V DC
Specified DC Current26A
Water Tank Capacity3L
Required WaterPurified or Distilled Water
Water TDS Requirement≤ 5 ppm
Unsuitable Source WaterTap Water / Mineral Water
BrandGitan

Confirm gas flow reference conditions, purity, outlet pressure, continuous operating limits and the complete power supply configuration before ordering. The specified DC rating does not establish the complete machine's AC input power.


Product Advantages

Product Advantages

The Gitan PEM Hydrogen and Oxygen Generator uses proton exchange membrane water electrolysis technology to generate hydrogen and oxygen through separate outlets. Its specified outputs are 1000mL/min hydrogen and 500mL/min oxygen.

Hydrogen Output: 1000mL/min through the hydrogen outlet.

Oxygen Output: 500mL/min through the oxygen outlet.

Electrolysis Technology: Proton exchange membrane (PEM).

Specified DC Rating: 15V, 26A.

Water Tank Capacity: 3L.

Required Water: Purified or distilled water with TDS ≤ 5 ppm.

PEM Water Electrolysis Technology

The generator uses a proton exchange membrane and electrode assembly to split water into hydrogen and oxygen. Hydrogen is generated at the cathode, while oxygen is generated at the anode.

The illustrated cell structure includes catalyst layers, diffusion layers and bipolar plates with flow channels. Separate gas paths collect the generated hydrogen and oxygen for delivery through their respective outlets.

The specified output rates are 1000mL/min for hydrogen and 500mL/min for oxygen. Confirm the flow reference conditions, measurement method and gas purity specifications when comparing equipment.

Gitan PEM water electrolysis principle showing the membrane-electrode assembly, hydrogen output of 1000mL per minute and oxygen output of 500mL per minute

Separate Hydrogen and Oxygen Outlets

The machine provides independent hydrogen and oxygen outlet connections, allowing the two gas streams to be routed separately according to the equipment instructions.

Hydrogen Outlet: Rated output of 1000mL/min.

Oxygen Outlet: Rated output of 500mL/min.

Viewed from the front as illustrated, the hydrogen outlet is on the left and the oxygen outlet is on the right. Always follow the identification labels on the supplied equipment.

Confirm connection dimensions, compatible tubing, outlet pressure and permitted backpressure before connecting downstream equipment.

Gitan separate gas outlets showing the left hydrogen outlet rated at 1000mL per minute and the right oxygen outlet rated at 500mL per minute

Purified Water Requirements and 3L Tank

The generator features a 3L water tank. Use purified or distilled water with TDS ≤ 5 ppm to meet the stated water-quality requirement.

Do not use tap water or mineral water. Follow the operating instructions for filling level, water replacement and routine maintenance.

Water tank capacity describes storage volume and does not establish continuous operating time. Confirm the permitted operating schedule, refill procedure and maintenance intervals for the selected configuration.

Gitan PEM generator water requirements showing purified or distilled water, TDS at or below 5 ppm, a 3L tank and no tap water or mineral water

DC Electrical Configuration

The specified DC electrical rating is 15V, 26A. Confirm the approved power supply and whether this rating applies to the electrolysis assembly or the complete machine.

The complete machine's AC input voltage, frequency and power consumption must be confirmed separately. Follow the supplied electrical and installation instructions.

Enclosure and Installation Planning

The illustrated enclosure includes a front control panel, side handles and caster wheels. Confirm the dimensions, weight, control functions and accessories included with the supplied unit.

Plan the installation around the required ventilation, service clearance, electrical supply and gas connections. Keep the equipment away from ignition sources and follow the operating instructions for gas handling.

Assembly, Performance Testing and Inspection

Buyers can contact Gitan to discuss the assembly process, inspection criteria and performance testing for the selected configuration. Request supporting documentation for rated gas flow, gas purity, outlet pressure and electrical specifications.

For purchasing acceptance, agree on the test conditions, required documents and inspection requirements before placing an order.

Illustration of hydrogen and oxygen generator assembly, performance testing and quality inspection

Assembly and testing illustration. Contact Gitan for actual production information and applicable inspection documentation.

Application Review and Product Selection

Equipment distributors, system integrators and project buyers can evaluate this generator against their hydrogen and oxygen supply requirements. Suitability depends on the required flow, purity, pressure, operating schedule and connection arrangement.

Provide Gitan with the intended application and downstream equipment requirements so the supplied configuration can be assessed before ordering.

OEM/ODM and Distribution Enquiries

Distributors, importers and brand owners can enquire about available customization, packaging, minimum order quantities, samples and lead times.

Please provide your destination market, required quantity, electrical requirements and documentation needs when requesting a quotation.

Frequently Asked Questions

What is the hydrogen output?

The specified hydrogen output is 1000mL/min. Confirm the flow reference conditions and measurement method when comparing performance specifications.

What is the oxygen output?

The specified oxygen output is 500mL/min through a separate oxygen outlet.

Are hydrogen and oxygen delivered separately?

Yes. This configuration has separate hydrogen and oxygen outlets. Follow the labels on the supplied equipment when connecting gas lines.

What water is required?

Use purified or distilled water with TDS ≤ 5 ppm. Do not use tap water or mineral water.

What is the water tank capacity?

The specified water tank capacity is 3L. Follow the instructions for filling limits and refilling.

What does the 15V, 26A rating refer to?

It is the specified DC electrical rating. Confirm which assembly it applies to and obtain the complete machine's electrical input requirements before arranging a power supply.

What are the gas purity and outlet pressure?

Request verified gas purity specifications, pressure limits and associated test conditions from Gitan. These values cannot be determined from the flow rates alone.

What should buyers confirm before ordering?

Confirm gas flow reference conditions, purity, pressure, operating limits, complete electrical input, dimensions, weight, connection sizes, accessories and destination-market documentation.

Explore Related Gitan Products

Explore Gitan's PEM electrolyzers and completed equipment products for related sourcing options.

Request Technical Specifications and a Quotation

Contact Gitan about the PEM generator with 1000mL/min hydrogen output and 500mL/min oxygen output. Send your destination market, intended application and required quantity to discuss the appropriate configuration.

Contact Gitan


Need Custom Design and Development for CCM And PEM Electrolyzers?

We strongly support customer personalisation and customisation, providing the most suitable solutions based on different customer needs. If you have any customisation requirements, please contact us and we will provide you with the most professional advice and products.

View More

Related Products

We R&D, design, manufacturing and sales of PEM membrane electrodes, hydrogen and oxygen electrolytic cells and other ancillary products.

PEM Hydrogen and Oxygen Generator – H2 1000mL/min, O2 500mL/min

The Gitan PEM Hydrogen and Oxygen Generator provides rated hydrogen output of 1000mL/min and oxygen output of 500mL/min through separate gas outlets. It uses PEM water electrolysis technology and features a 3L water tank. The specified DC electrical rating is 15V, 26A. Use purified or distilled water with TDS ≤ 5 ppm.

1000ml/min H2 Output PEM Hydrogen Inhalation Machine

Gitan hydrogen inhalation machine with rated outputs of 1000 mL/min H₂ and 500 mL/min O₂, a 2 L water tank, and separate hydrogen and oxygen outlets.

2000 mL/min PEM Hydrogen-Oxygen Generator | 1000 mL/min O₂ Output

Gitan PEM hydrogen-oxygen generator delivers 2000 mL/min H₂ and 1000 mL/min O₂. Separate outlets, 3 L tank, four casters, TDS ≤5 ppm.

2000 mL/min PEM Hydrogen-Oxygen Generator with 30 V DC Power

Gitan's 2000 mL/min PEM hydrogen-oxygen generator features a rated oxygen output of 1000 mL/min, separate H₂ and O₂ outlets, a 3 L water tank and four swivel casters. The electrical specifications are DC 30 V / 26 A and AC 220 V / 50 Hz. Purified or distilled water with TDS ≤5 ppm is required.

600–2000 mL/min Variable-Flow PEM Hydrogen-Oxygen Generator

Gitan's variable-flow PEM Hydrogen-Oxygen Generator features a published hydrogen output range of 600–2000 mL/min and a rated configuration of 2000 mL/min H₂ and 1000 mL/min O₂. It includes one hydrogen outlet, one oxygen outlet, a 3 L water tank and four swivel casters. Electrical specifications are DC 30 V / 26 A and AC 220 V / 50 Hz. Purif

1500 mL/min PEM Hydrogen Inhalation Machine

PEM hydrogen inhalation machine with 1500 mL/min H₂ and 750 mL/min O₂ rated output, a 3 L water tank, and separate hydrogen and oxygen outlets.