1500ml/min Hydrogen-Oxygen Generator

Introduction

The Gitan 1500ml/min Hydrogen-Oxygen Generator is an electrolysis-based gas generation system designed to produce hydrogen and oxygen from purified water. It delivers a specified hydrogen output of 1500ml/min and an oxygen output of 750ml/min.

The unit integrates an electrolysis cell module, water-gas separation module, electronic control system, and humidification bottle. Its touchscreen control panel allows users to set operating time and gas output, start or stop operation, and monitor equipment status.

Designed with water-level and water-quality monitoring, temperature protection, and fault indicators, this hydrogen-oxygen generator supports convenient operation and routine equipment maintenance. It requires purified or distilled water with a TDS level below 5ppm and must be operated in accordance with the supplied instructions and applicable safety requirements.

Inquire Now Next Product

Product Description

1500ml/min Hydrogen Output

The generator is specified to produce hydrogen at 1500ml/min and oxygen at 750ml/min, with a hydrogen-to-oxygen production ratio of 2:1. Gas output can be set through the control panel.

Touchscreen Control Panel

The electronic control panel allows users to set operating time and gas output, start or stop the equipment, and view operating status. The display also provides cumulative operating time and indicators for water level, water quality, temperature, and equipment faults.

Integrated Electrolysis and Gas Management System

The main unit integrates an electrolysis cell module, water-gas separation module, computer control module, and humidification filter module. A built-in water tank supplies water to the electrolysis cell, while the humidification bottle is used for gas humidification and filtration.

Water Quality Monitoring

The machine requires purified or distilled water with a TDS level below 5ppm. Unfiltered tap water and inadequately filtered mineral water must not be used. Water-quality monitoring helps identify when the supplied water does not meet the equipment's requirements.

Operating Protection and Fault Indicators

The equipment includes indicators for low water level, water quality, overheating, and general faults. The control system identifies several operating conditions, including insufficient water, excessive water level, unsuitable water quality, and temperature-related faults.

Product Specifications

Product Type: Hydrogen-Oxygen Generator
Hydrogen Output: 1500ml/min
Oxygen Output: 750ml/min
Hydrogen-to-Oxygen Production Ratio: 2:1
Power Supply: 220V / 50Hz
Rated Power: 480W
Required Water Quality: Purified or distilled water, TDS below 5ppm
Operating Temperature: 5°C–30°C
Main Unit Dimensions: 350 × 320 × 340mm
Control System: Touchscreen control panel
Humidification: Built-in humidification bottle
Origin: China

Installation and Maintenance

Place the equipment on a flat surface in a well-ventilated area, leaving more than 20cm of clearance from surrounding obstacles. Use a properly grounded electrical outlet with a leakage protection switch. Keep all exhaust ports open and keep the equipment away from open flames, smoking, and oxygen sources such as oxygen cylinders.

Check the water level before operation. The humidification bottle should be filled to the marked level, and its water should be replaced regularly during use. Disconnect the power supply before cleaning or maintenance. The manual recommends replacing the machine's internal piping every 18–24 months.

Always follow the supplied instruction manual and applicable local safety requirements.

Suitable for People

Hydrogen Equipment Distributors: Businesses sourcing hydrogen-oxygen generation equipment for their product portfolios.
Equipment Importers: Buyers looking for hydrogen-oxygen generators with specified gas output and electronic controls.
Wellness Equipment Brands: Brands evaluating hydrogen-related equipment for applications permitted by applicable local regulations.
OEM/ODM Buyers: Businesses interested in discussing product sourcing or potential customization options with the manufacturer.
Technical Equipment Buyers: Customers who require adjustable gas output, operating-time settings, and equipment status monitoring.

Suitability for any inhalation, therapeutic, or medical application must be confirmed against the product's certification status, intended-use documentation, and the regulations of the destination market.

Benefits

Specified Gas Output: Hydrogen output of 1500ml/min and oxygen output of 750ml/min.
Touchscreen Operation: Convenient adjustment of operating time and gas output.
Integrated System Design: Combines electrolysis, water-gas separation, electronic control, and humidification components.
Water-Quality Monitoring: Helps identify water that does not meet the required specifications.
Multiple Status Indicators: Displays operating status, water level, water quality, temperature, and fault conditions.
Built-In Humidification Bottle: Supports gas humidification and filtration as described in the product manual.
Maintenance Guidance: Includes instructions for water replacement, cleaning, inspection, and internal piping replacement.
Compact Equipment Footprint: Main unit measures 350 × 320 × 340mm.
Manufacturer Supply: Available for business buyers to evaluate for their product sourcing needs; customization options should be confirmed separately.