Provide customized design one-stop service
Introduction
This system uses PEM (Proton Exchange Membrane) technology to electrolyze purified water and produce high-purity hydrogen. It is an integrated solution including the PEM electrolyzer, DC power supply, balance-of-plant (BOP) auxiliaries, hydrogen purification system, pure water supply module, cooling module, and electrical control system.
The system supports a hydrogen production capacity of 0.5–50 Nm³/h, with hydrogen purity up to ≥99.999% (depending on configuration).
Designed for industrial operation, it offers safe and reliable performance, one-touch start/stop, stable output, high integration, and a compact footprint. With fast dynamic response, it is well suited for renewable-energy-driven hydrogen production and is widely used in distributed hydrogen production and refueling stations, off-grid PV hydrogen production, CHP applications, high-purity hydrogen supply for the semiconductor industry, laboratory hydrogen generation, and more.
Share:
Principle Diagram Of PEM Hydrogen Production System
BOP Parameters for the PEM Water Electrolysis Hydrogen Production Equipment Series
| Mode | CSDJ-GT0.5 | CSDJ-GT1 | CSDJ-GT2 | CSDJGT5 | CSD-GT10 | CSDJ-GT15 | CSDJ-GT20 | CSDJ-GT30 | C5DJ-GT50 | |
| Hydrogen Production | Nm³/h | 0.5 | 1 | 2 | 5 | 10 | 15 | 20 | 30 | 50 |
| Oxygen Production | Nm³/h | 0.25 | 0.5 | 1 | 2.5 | 5 | 7.5 | 10 | 15 | 25 |
| Range Of Hydrogen Production | % | 5~120 | 5~120 | 5~120 | 5~120 | 5~120 | 15~120 | 15~120 | 15~120 | 15~120 |
| Hydrogen Purity | % | 99.999% | ||||||||
| Dew Point | ℃ | ≤-70°C | ||||||||
| Hydrogen Purification Method | PSA | PSA | PSA | PSA | PSA | TSA | TSA | TSA | TSA | |
| Hydrogen Outlet Pressure | MPa | 0-3.5 | ||||||||
| Operating Temperature (℃) | ℃ | 5~55°C | ||||||||
| Environmental Temperature | ℃ | 5~40°C | ||||||||
| Type Of Electrolytic Cell | (PEM) Proton Exchange Membrane (PEM) pure-water electrolysis for oxygen production. | |||||||||
| DC Power Consumption | kWh/Nm³ | 4.0-4.5 | ||||||||
| Power Requirement | 380V/50Hz | |||||||||
| Water Quality Requirement | Conductivity ≤ 0.1 μS/cm; resistivity ≥ 10 MΩ·cm. | |||||||||
| Water Inlet Pressure | MPa | 0.3~0.4 | ||||||||
| Rated Inlet Water Flow Rate | L/h | 5 | 10 | 20 | 50 | 100 | 150 | 200 | 300 | 500 |
| Control Mode | PLC control, touchscreen HMI, one-button start. | |||||||||
| System Monitoring Method | Real-time monitoring of temperature, flow rate, pressure, purity, hydrogen leakage, etc. | |||||||||
| Safety Protection Device | Equipped with safety interlocks and one-button emergency stop. | |||||||||
| Product Dimensions | L/mm | 1550 | 1550 | 1550 | 1550 | 2150 | 2900 | 2900 | 2900 | customized container |
| W/mm | 1100 | 1100 | 1100 | 1100 | 1100 | 1300 | 1300 | 1300 | ||
| H/mm | 1750 | 1750 | 1750 | 1750 | 1950 | 2130 | 2130 | 2130 | ||
| Field Of Application | Distributed hydrogen production & refueling stations, off-grid PV-powered hydrogen production, combined heat and power (CHP), high-purity hydrogen for semiconductors, laboratory hydrogen supply, etc. | |||||||||
| NOTED | Optional add-ons include a dedicated water supply unit for hydrogen production and a chiller. | |||||||||
Industrial PEM Electrolyzer Series Specifications
Industrial PEM Electrolyzer Series Specifications
| Product Model | GTPEM0.5 | GTPEM1 | GTPEM2 | GTPEM5 | GTPEM10 | GTPEM15 | GTPEM20 | GTPEM30 | GTPEM50 | |
| Hydrogen Production | Nm³/h | 0.5 | 1 | 2 | 5 | 10 | 15 | 20 | 30 | 50 |
| Oxygen Production | Nm³/h | 0.25 | 0.5 | 1 | 2.5 | 5 | 7.5 | 10 | 15 | 25 |
| Number Of Cells | PCS | 6 | 12 | 24 | 15 | 30 | 45 | 60 | 28 | 47 |
| Active Area | cm² | 100 | 100 | 100 | 400 | 400 | 400 | 400 | 1275 | 1275 |
| Rated Current | A | 200 | 200 | 200 | 800 | 800 | 800 | 800 | 2550 | 2550 |
| Voltage | V | 11 | 22 | 43 | 27 | 54 | 81 | 108 | 51 | 84 |
| Energy Consumption | kWh/Nm³ | 4.3 | ||||||||
| Load Range | % | 10~120% | ||||||||
| Inflow Rate | L/min | 2 | 5 | 10 | 24 | 48 | 72 | 96 | 143 | 239 |
| Pressure Resistance | MPa | 0~3.5 | ||||||||
| Hydrogen Purity | % | 99.95%(Dry Basis) | ||||||||
| Water Quality Requirements | Conductivity ≤ 0.1 μS/cm; Resistivity ≥ 10 MΩ·cm | |||||||||
| 0perating Temperature | ℃ | 40℃~60℃ | ||||||||
| Product Dimensions | L/mm | 220 | 220 | 220 | 470 | 470 | 470 | 470 | 470 | 750 |
| W/mm | 220 | 220 | 220 | 470 | 470 | 470 | 470 | 470 | 750 | |
| H/mm | 138 | 156 | 192 | 245 | 290 | 334 | 379 | 694 | 751 | |
Need Custom Design and Development for CCM And PEM Electrolyzers?
We strongly support customer personalisation and customisation, providing the most suitable solutions based on different customer needs. If you have any customisation requirements, please contact us and we will provide you with the most professional advice and products.
View MoreRelated Products
We R&D, design, manufacturing and sales of PEM membrane electrodes, hydrogen and oxygen electrolytic cells and other ancillary products.
Smart Alkaline Ionizer with Multi-Level pH Control and Electrolysis Chamber
The J002-11P Electrolyzer is designed for high-efficiency hydrogen production with an 11-layer microfiltration membrane, platinum coating for extended lifespan, and dual-sided coating for superior scale removal. Its compact structure ensures stable and reliable performance, making it ideal for sustainable energy applications.
RO water is further purified by a resin filter before being added to the dedicated water tank of the PEM electrolyzer. After passing through a second resin filter for further purification, the purified water (TDS=0) is supplied to the PEM electrolyzer. The electrolyzer operates with constant current to generate hydrogen and oxygen. Oxygen is vented
The 1000ml 200ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of five layers of 200ml PEM proton exchange membranes stacked together.
PEM Electrolyzers for Medical Hydrogen - Hydrogen Inhalation for Stress Relief
The 2500ml 250ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of ten layers of 250ml PEM proton exchange membranes stacked together.
Three-Button Electrolyzed Alkaline Water Module for Easy Control
The Three-Button Electrolyzed Alkaline Water Module is designed for producing purified alkaline water with PH levels of 8.5 and 9.5. Using a flow sensor and TDS monitoring system, this module adjusts the electrolyzer’s power to produce alkaline water at the cathode and acidic water at the anode.
Over-Flow Hydrogen-Rich Water Generator Module for Purifiers
The Over-Flow Hydrogen-Rich Water Module uses a cutting-edge electrolysis process to generate high-quality hydrogen-rich water. RO purified water is passed through a resin filter and gas-water separator to the anode water inlet, while a pump supplies the cathode inlet.
Long-Life PEM Hydrogen Generator for Household & Commercial Devices
The 2400ml 300ml/layer series Single-Output Hydrogen-Oxygen Electrolyzer is composed of 8 layers of 300ml PEM proton exchange membranes stacked together.
2000ml/min PEM Electrolyzers for Hydrogen Inhalation - Hydrogen Therapy for Wellness A2000D-8250
The 2000ml 250ml/layer series PEM Electrolyzer offers high-performance hydrogen and oxygen production, utilizing advanced proton exchange membrane technology. It is ideal for applications in clean energy with a reliable power supply and low water consumption.
